Whether you're new to aluminum extrusions or a seasoned extrusion designer, it's important to understand how an extrusion die is designed to create different profile shapes and why those differences impact the die manufacturing cost. While the upfront investment in an aluminum extrusion die may look expensive, shorter lead times and overall lower production costs make it a clear winner for many product applications.

What is an Extrusion Die?

Extrusion dies are essentially thick, circular steel disks containing one or more openings to create the desired profile. They are normally constructed from H-13 die steel and heat-treated to withstand the pressure and heat of hot aluminum as it is pushed through the die.

While it may appear that aluminum is a very soft metal, the reality is it takes a tremendous amount of pressure to push a solid log (billet) of aluminum through a thin, multi-holed die to create the desired shape. In fact, it takes 100,000-125,000 psi of force to push a billet through an 8" inch press.

To put that force into context, a power washer to clean a car pushes out water at around 2,500 psi. Increasing that pressure to 5,000 psi can destroy the brick on a building. The pressure produced in an extrusion press is 20 times that amount.

Die Profile Categories

While there are a multitude of shapes that can be created using aluminum extrusions, the dies used fall under three categories: solid dies, semi-hollow dies, and hollow dies.

Solid Dies

Solid Profile Extrusion Die Stack

A solid die creates a final shape that has no enclosed voids/openings, such as a rod, beam or angle. As such, a solid die is typically less expensive to manufacture than other die types.

To produce a solid profile requires a set of parts called a "die stack." This stack is made up of:

• Feeder plate controls the metal flow through the die orifice.
• Die plate forms the shape.
• Backer plate supports the tongue of die to prevent collapse or distortion.
• Bolster supports the extrusion load transmitted from the die and backer.

Hollow Dies

Hollow Profile Extrusion Die Stack

A hollow die produces profiles with one or more voids, such as a simple tube with one void or a complex profile with many detailed voids. To produce a hollow shape requires a different die set, which includes:

• Mandrel is located inside the die and has two or more port holes to generate the internal features of the profile and to control the flow of metal. During extrusion the aluminum billet separates into each port and rejoins in the weld chamber prior to entering the bearing area. The ports are separated by webs, also known as legs, which support the core or mandrel section. Because of these extra components, a hollow die has a higher material and tooling cost, and typically get more expensive the more voids are included.
• Die Cap is a multi-piece die which makes the shape.
• Bolster supports the extrusion load transmitted from the die cap and mandrel.

Semi-Hollow Dies

Semi-Hollow Profile Extrusion Die Stack

A semi-hollow die extrudes a shape that is nearly hollow, partially enclosing a void. Similar to a hollow die, a semi-hollow die set includes a mandrel with port holes, but without cores to make a complete void, as well as a die cap and bolster.

While a solid die may also partially enclose a void, the difference is the ratio of the area of the void to the size of the gap where the tongue is connected to the main body of the die. This ratio is called the tongue ratio. For semi-hollow dies, the tongue ratio is larger than in a solid die, which creates more complexity when manufactured, and in turn more cost.

How Long Do Extrusion Dies Last?

Heat buildup and uneven pressure caused by a profile's design-use of thin walls, unbalanced shapes, and protruding legs-are the biggest killers to the longevity of an extrusion die. An experienced extruder will design the die to control heat and uneven pressure and slow the extrusion rate to extend the life of a die, but eventually dies must be replaced. Fortunately for designers, most extruders absorb the cost of die replacements.

However, a designer should understand which design decisions will most dramatically impact their upfront tooling costs before sending a design to an aluminum extruder. Changes, where possible, to a profile's design, tolerance settings, and alloy could save you thousands of dollars in tooling costs.

Group introduction:
Giansun Technology Group founded in 2001,is a comprehensive diversified enterprise which mainly engaged in R&D and production of hot extrusion die,extrusion tooling, aluminum Profile extrusion machinery,full aluminum furniture,precision machinery parts of rail transport.Giansun Technology Group administered companys: Jiangyin Giansun Mould Co., Ltd,Jiangsu Giansun Precision Components Co., Ltd,Jiangyin Giansun Precision Machinery Co., Ltd,Jiangsu Gianstone Aluminum Furniture Co., Ltd and Jiangsu Giantally IMP&EXP Co.,Ltd.
Giansun company plant covers an area of about 80,000 M2,employees more than 1,000 skilled workers,including more than 350 professional and technical personnel with college education,high-tech talent occupy 38% of all employees,more than 50 people with senior professional titles.
Giansun Group Has always attached importance to scientific and technological innovation in improving the core competitiveness of products,we built "Jiangsu high precision mold industry digital design engineering technology research center", "Jiangsu enterprise technology center" , "City academician workstation" many other research and development platforms,Giansun Hired domestic well-known academicians to guide the work of scientific research projects,we established cooperation with the Central South University, University of Science and Technology Beijing, Southeast University, GRINM, Nanjing University of Aeronautics and Astronautics and many other domestic famous universities and scientific research institutions.
Giansun has fully implemented the ISO9001 and ISO14001 standards,with more than 500 authorized patents.

Group video: https://youtu.be/uHapIps2zZQ
Mould factory video: https://youtu.be/R5Szzl4aX0E
Machinery factory video: https://youtu.be/KFI5N4Q2DZA

Extrusion Line Video available:
10MN aluminium extrusion line: https://youtu.be/eyezi0C9OCE
14MN aluminium extrusion line: https://youtu.be/ocCeJSYj5SU
18MN aluminium extrusion line: https://youtu.be/sJM0KjD2Nqo
25MN aluminium extrusion line: https://youtu.be/_yHX5yF6DDM
90MN aluminium extrusion line: https://youtu.be/n38jlq4k9WA