The best press release, the best content, the most interesting news...PLASTEX vacuum systems have established themselves in recent years for degassing the melt in the screw zone of extruders.At the K 2022, Busch Vacuum Solutions will present such a system with a built-in MINK claw vacuum pump to trade visitors.These vacuum pumps work dry, which means they do not require any operating materials in the compression chamber.Effort and costs for their processing or disposal are therefore completely eliminated.The new generation of PLASTEX vacuum systems also offers many other advantages.Due to the need-based control and the possibility of adjusting the vacuum level exactly to the material to be extruded, the extruder and the temperature conditions, a reproducible product quality is possible without having to manually readjust the vacuum level via valves during the process.PLASTEX vacuum systems are available in various configurations and sizes.They are suitable for both compounds and masterbatches.They can be used to degas polyolefins such as PP/PE as well as EVA, PBT, ABS, EVOH or POM.Even the degassing of recycling material does not pose any problems for these innovative vacuum solutions from Busch. A rinsing device enables the vacuum pump to be cleaned after or during the process.The cleaning intervals and the dosage of the cleaning agent can also be programmed as required.A controller also permanently monitors the status of the filters and separators and reports immediately via the display or via the extruder controller if, for example, a filter has to be cleaned or condensate has to be drained from the post-separator or the condensate collection tank.The operator therefore always has an overview of all operating parameters.Any necessary action steps are displayed at any time.This increases operational safety, simplifies operation and minimizes maintenance costs considerably.Supported by intelligent IoT solutions, downtimes in production can also be reduced to a minimum.MINK claw vacuum pumps from Busch have not only established themselves for degassing the melt during extrusion.This vacuum technology is also ideal for pneumatic material feed.These vacuum generators not only enable the gentle transport of material in conveyor systems, but also further energy and cost savings through energy-efficient operation.Let us show you the new generation of PLASTEX vacuum systems and the intelligent IoT dashboard live.Visit Busch's vacuum experts at K 2022 at booth 9E23 in hall 9!Busch Vacuum Solutions Schauinslandstrasse 1 79689 Maulburg Telephone: +49 (7622) 681-0 Fax: +49 (7622) 5484 http://www.buschvacuum.com